DIY Check list

  •  Tiles  Where would you be without them!
  •  Tile adhesive  It is essential to have the correct adhesive for your job, wall/floor indoor/outdoor.
  •  Tile spacers  You decide 1.5/3/5mm spacers are required for even gaps between your tiles.
  •  Primer  Must be used over all absorbent surfaces like timber, concrete, slate board. Priming makes the adhesive stick better.
  •  Tile grout in appropriate colour
  •  Tape measure
  •  Chalk line & chalk
  •  Straightedge
  •  Spirit level
  •  Notched trowel  For applying adhesive to the surface
  •  Tile cutter/nipper  We hire cutters over night
  •  Rubber float/squeegee  Easy way to apply the grout
  •  Sponge  A must for cleaning up the excess grout
  •  Tile sealer & cleaner
  •  Trims  For finishing off the edges of your tile job
  •  Waterproofing