DIY Check list

•  Tiles  Where would you be without them!
•  Tile adhesive  It is essential to have the correct adhesive for your job, wall/floor indoor/outdoor.
•  Tile spacers  You decide 1.5/3/5mm spacers are required for even gaps between your tiles.
•  Primer  Must be used over all absorbent surfaces like timber, concrete, slate board. Priming makes the adhesive stick better.
•  Tile grout in appropriate colour
•  Tape measure
•  Chalk line & chalk
•  Straightedge
•  Spirit level
•  Notched trowel  For applying adhesive to the surface
•  Tile cutter/nipper  We hire cutters over night
•  Rubber float/squeegee  Easy way to apply the grout
•  Sponge  A must for cleaning up the excess grout
•  Tile sealer & cleaner
•  Trims  For finishing off the edges of your tile job
•  Waterproofing

           

           

The above file downloads require
Adobe Acrobat Reader to view. You can download the latest version for free here.